Nastavení
Rychlé dodání
Dodávka zdarma
Incoterms
Typy plateb
Produkt služby Marketplace
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Product List
The Type MLS is available in three case styles, and the MLP, four case styles. Case Style A has a mounting tab on each end and two leads on one end. The tabs are connected to the case and the case to the negative lead. For the MLS the case is connected to the negative lead only through the conductive electrolyte. However, for both the MLP and the MLS the case must be floating or connected to the negative lead in the application circuitry. Standard case lengths are 1.5, 2 and 3 inches, with other lengths available. The capacitance scales with the length minus a half inch. So, if there were 1000µF at the desired voltage in a 3 inch case, a 2½ inch case would have 1000µF times the fraction, 2 divided by 2½, that would be 800µF.
PTM Published on: 2013-02-07
Česká republika