LED calculator

2024-08-21 | By M5Stack

License: General Public License Bluetooth / BLE LED / Display Drivers Wifi Arduino ESP32 M5Stack

Thanks for the source code and project information provided by @Framework Labs

Things used in this project

Hardware components

M5Stack ATOM Lite ESP32 Development Kit×1

Texas Instruments Shift Register- Serial to Parallel×1

LED (generic)×7

Resistor 220 ohm×7

Software apps and online services

PlatformIO IDE

Story

About

This implements a little calculator with 7 LEDs as output (applying a shift register), an M5Stack-Atom-Lite as the MCU and its button as input.

Usage

Select the first number by cycling through digits 0 to 9, minus-sign "-" and decimal point "." by short press. To enter another digit double-press. To finish the number and get to the operator selection apply a long press.

Cycle through the operators plus, minus, multiply and divide with a short press and leave to the input of the second operand with a long press. Enter the second operand like the first one.

If you then long press to finish the number, the result will be displayed.

Example

In the example video you can see the input of the operand "3" followed by the selection of the multiply operator ("x") followed by the selection of digit "5" as the second operand. The result 15 is displayed as "=15".

Example Video

Code

https://github.com/frameworklabs/sevensegment#readme