ReferenceDesignLibrary

Designs (789)

789 Results - Page 1/79 |< < 1 2 3 4 5 > >|

LMZ23610EVAL: 1.2/ 2.5/ 3.3/ 5V @ 10A, 6 ~ 36V in

Manufacturer: Texas Instruments

The LMZ23610/8/6 and LMZ22010/8/6 SIMPLE SWITCHER® power modules are easy-to-use DC-DC solution capable of driving up to a 10, 8 or 6 ampere load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering. The LMZ23610/8/6 can accept an input voltage rail between 6V and 36V and the LMZ22010/8/6 can accept an input voltage rail between 6…

View Design

LM5006EVAL: 5V @ 500mA, 6 ~ 75V in

Manufacturer: Texas Instruments

The LM5006EVAL evaluation board provides the design engineer with a fully functional buck regulator, employing the constant on-time (COT) operating principle. This evaluation board provides a 5V output over an input range of 6V to 75V. The circuit delivers load currents to 500 mA, with current limit set at a nominal 1 Amp.

View Design

LMZ22003EVAL: 3.3V @ 3A, 6 ~ 20V in

Manufacturer: Texas Instruments

The LMZ23605/03, LMZ22005/03 evaluation boards are designed to be an easy-to-use platform to evaluate the full capabilities of this family of SIMPLE SWITCHER® power modules. The PCB construction has excellent thermal performance and includes extra locations for optional components that may not be required in the end application.

View Design

LMZ23605EVAL: 3.3V @ 5A, 6 ~ 36V in

Manufacturer: Texas Instruments

The LMZ23605/03, LMZ22005/03 evaluation boards are designed to be an easy-to-use platform to evaluate the full capabilities of this family of SIMPLE SWITCHER® power modules. The PCB construction has excellent thermal performance and includes extra locations for optional components that may not be required in the end application.

View Design

LM21212-1EVM: 1.2V @ 12A, 2.95 ~ 5.5V in

Manufacturer: Texas Instruments

This evaluation board provides a solution to examine the high efficiency LM21212-1 buck switching regulator. The LM21212-1 is capable of driving up to 12A of continuous load current with excellent output voltage accuracy due to its ±1% internal reference.

View Design

LMR64010XMFDEMO: 24V @ 125mA, 2.7 ~ 12V in

Manufacturer: Texas Instruments

The LMR62014 and LMR64010 are high frequency switching boost regulators which offer small size and high power conversion efficiency. The parts operate at a 1.6MHz switching frequency. The primary difference between the LMR62014 and LMR64010 is that the LMR62014 has a higher current internal switch FET (with lower breakdown voltage), while the LMR64010 has a higher voltage FET which handles less c…

View Design

LMZ10500EVAL: 1.8V @ 650mA, 2.7 ~ 5.5V in

Manufacturer: Texas Instruments

The LMZ10501 and LMZ10500 SIMPLE SWITCHER® nano modules are easy-to-use DC-DC solutions optimized for space-constrained applications. The LMZ10501 is capable of driving up to 1A load with excellent power conversion efficiency, line and load regulation, and EMI performance. The LMZ10500 is a 650mA version module and is pin-to-pin compatible with the LMZ10501.

View Design

STEVAL-ISA081V1: 12V @ 1A, 3.3V @ 100mA, 85~305Vin

Manufacturer: STMicroelectronics

(From User Guide) The purpose of this document is to provide information on the STEVAL-ISA081V1 switched mode power supply (SMPS) demonstration board. The STEVAL-ISA081V1 is an isolated SMPS capable of delivering a 12 W output over a wide input voltage range. It is designed for a mains application focused on providing a cost-effective and space-saving solution.

View Design

STEVAL-ISA044V6: 3.3V @ 3A, 2.5 ~ 18V, DFN

Manufacturer: STMicroelectronics

The STEVAL-ISA044V6 demonstration board is based on the ST1S10 device assembled in a DFN package. The ST1S10 is a step-down DC-DC converter with the inhibit function optimized for powering high voltages in LCD applications and low voltages in digital-core HDD applications.

View Design

TPS54327EVM-686: 1.05V @ 3A, 4.5 ~ 18V in

Manufacturer: Texas Instruments

The TPS54327 is a single, adaptive on-time, D-CAP2™-mode, synchronous buck converter requiring a very low external component count. The D-CAP2™ control circuit is optimized for low-ESR output capacitors such as POSCAP, SP-CAP, or ceramic types and features fast transient response with no external compensation. The switching frequency is internally set at a nominal 700 kHz.

View Design
789 Results - Page 1/79 |< < 1 2 3 4 5 > >|