Settings
Fast Delivery
Free Shipping
Incoterms
Payment Types
Marketplace Product
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Product List
When using synchronization, the switching frequency of the device will synchronize to the rising edge of the clock source driving the SYNC pin. The logic low level for the input clock source must be below 0.8V and the logic high level must exceed 2.0V to guarantee proper operation. The device will synchronize to frequencies from 500 kHz to 1.5 MHz. If the synchronization clock is removed or not present during startup, the oscillator of the device will run at approximately 410 kHz. When the SYNC pin is not used it should be connected to ground.
PTM Published on: 2011-11-02
Czech Republic